Winter Blahs
By Steve Huber - March 1, 1999During the open water fishing season, it's hard to find time to do the routine maintenance that really should be done, especially when your time is divided between my dual careers as a firefighter and also a fishing guide. All of the reels need to have the old line stripped off (do what I do...put it on your tip-ups and jig poles, if you ice fish). I know, I know, it's expensive to replace that much line and far easier/cheaper to replace just the first 50 - 75 yards of line, but do you really want to risk the fish of a lifetime because you tried to stretch one more outing (season?) out of your line? When you add up all that you have tied up in rods, reels, lures, terminal tackle, etc., it's false economy to NOT replace all of the line. It's been said before and I'll say it again...your line is the only connection between you and the fish, don't skimp on something that important! This might be also the time to consider one of the premium, synthetic lines (like FireLine) that are on the market, some like them, some don't. You might do as I did in the beginning, try it on one or two reels and see if you like it.
Something to drive your "significant other" crazy is to clear off the kitchen table and take apart your reels to clean and lubricate them. I've found that the kitchen table works great, the light is good and just as important, you're near the refrigerator. Assemble the necessary tool to disassemble your reels, and what I do is take one part off, and clean it with a mild solvent (I use low odor mineral spirits) in a small pan with a flux brush (available at any hardware store). As I clean, I lay all of the parts out in the order that I took them off to reduce any confusion when it comes time to put things back together. It's amazing how much gunk and grunge accumulates on a reel in the course of a season. I usually try to clean my reels several times during the season but...well, you know...
As you are cleaning, take note of the condition of the parts, if anything looks worn, now is the time to get replacement parts, not opening weekend. If you don't have a reel repair shop nearby, there are several sources on the InterNet, you can order them on-line or over the phone. Check with your friendly neighborhood bait shop, if they can't get you the parts, they'll probably have a shop that they can refer you to.
After everything is apart and cleaned, I begin to reassemble the reel, lubricating with either a good reel oil or grease, depending on the part. If you paid attention to how things came apart and you laid things out in order, everything should go back together easily. If not, you have plenty of time to study the diagrams that came with the reel (you kept that stuff from the box when you got the reel, right? I thought so), and hopefully get them back together. If not, put everything in a box and take it to that friendly, neighborhood bait shop and either they can get it back together or they'll have a source for reel repair that they can send it to. Now, aren't you glad that you did this now, rather than two days before leaving on that lunker expedition??
Get your rods out and check them over, clean the grips with a mild detergent and warm water. You'll be amazed at how much crud comes off and how nice the grips will look and feel. If you have rough spots on cork
As you are checking the eyes, pay attention to the wrappings on the eyes. If they are starting to look worn and frayed, they too will need to be re-done. If you don't know how to do this part, there are books on rod building available (check your local library) that will show you how to do this, it's not as hard as it looks. Mostly, it's time consuming. Besides, it's cold outside and there's nothing on t.v. anyway, what else do you have to do? Another thing that you can do is use a good automotive paste wax on the rod blank itself. It helps protect the rod finish from fading in the damaging rays of the sun.
The last thing that you have to do is go through your tacklebox(s?). This is a pleasurable experience in itself. Look at each lure, remembering whether it produced or not. If it did, doesn't it bring memories flooding back? If it didn't maybe it should be taken out. Do what I do, give it to a kid...they'll always manage to catch a nice fish on it and make you wish you'd never given it away. Besides, if you have empty spaces in your box, it gives you a valid (?) reason to buy new baits. Checks the hooks, if they're rusty, they need to be replaced and if they can be replaced, put on new hooks and sharpen them...now. Use a metal cleaner and polish up those spinner blades. If the wrappings on those bucktails is unraveling, use fingernail polish to touch them up and re-seal the wrappings. You can while away several days doing this...I can stretch it out over a week. My wife says I'm daydreaming and stalling cleaning the driveway...I say that I'm being practical, prepared and re-living fond memories while avoiding a heart attack.
Until next time, see ya.
Steve Huber